5. INMARSAT COMMUNICATIONS
5-9
5.1.3 How to send a file saved to the hard disk
1. Close any open files.
2. Press the F3 and 1 keys to show the [Transmit Message] menu.
3. Select [Message File] then press the Enter key.
4. Select a file then press the Enter key.
Note: When an e-mail with attachment is sent, the file volume increases by 1.5
times because of MIME coding. To lower the charges, select the file to attach from
the [Message File] and select [DATA] from [Code].
5. To send the message to a station registered on the station list, follow from step 4
on page 5-3. To send to a station not listed on the station list, follow from step 3
on page 5-7.
1. Transmit Message
2. Cancel
3. Request Delivery Status
Transmit Message
Normal
Size 24
TELEX/MES
82
65-2111
303 (KDDI)
ON
00:00
Immediate
IA5
Priority
Message File
Station Name
Destination Type
Prefix Code
Country/Ocean Code
Destination
Modem Type
Address
Subject
Attach File
LES ID
Option
Confirmation
Send Delay
Delivery Delay
Code
[ TRANSMIT ]
Send
[Settings\xxxx\MyDocuments\FELCOM19 ]
To View: SPACE Make Dir: INS Remove Dir: DEL
Filename Size Date & Time
.
..
EGC
E0970715.001
E0970715.002
E0970715.003
4 Files exist 579584 bytes free
2012-01-25 02:33
2012-01-25 02:52
2012-01-25 02:59
2002-01-25 03:13
2002-01-25 04:16
2002-01-25 06:43
868
372
6794
864
843
833
To Next Page
Loading...
