Furuno FELCOM19 Inmarsat Mini-C MES - How to Save Received Messages; How to Automatically Save Received Message; How to Delete Received Messages

5. INMARSAT COMMUNICATIONS
5-19
5.2.5 How to save received messages
1. Press the F6 and 2 keys to display the [Received Message] log.
2. Select the file to save. To confirm contents of a file, press the Enter key. For con-
fidential messages the password entry window appears after pressing the Enter
key. Enter the password then press the Enter key.
3. Press the Ctrl+E key to save the file. For confidential messages the password en-
try window appears. Enter password then press the Enter key.
If the same file name is found on the hard disk, "File already exists. Overwrite?" ap-
pears.
5.2.6 How to automatically save received message
1. Press the F8 and 5 keys to show the [Auto Mode Setup] menu.
2. Select [Auto Receive Message Save] then press the Enter key.
3. Select [ON] to automatically save received messages then press the Enter key.
4. Long-press the Esc key to return to the standby display.
5.2.7 How to delete received messages
1. Press the F6 and 2 keys to display the [Received Message Log].
2. Select the file to delete. To confirm contents of a file, press the Enter key. For
password-affixed messages the password entry window appears. Enter the pass-
word then press the Enter key.
3. Press the Delete key. You are asked if you are sure to delete the message file.
For password-affixed messages, the password entry screen appears. Enter pass-
word then press the Enter key.
4. Press the Enter key to delete the message, or select No then press the Enter key
to escape.
5. Long-press the Esc key to return to the standby display.