Furuno FE-700 - Circuit Description; 1.1 General Block Diagram

FURUNO FE-700
E2366S01T
1 hour at 5 sec Interval, 12 hours at 1 minute interval and 24
hours at 2 minutes interval
E ternal navigational sensor re uired.
3.1 Display 4.5-inch monochrome LCD
3.2 Depth indication . m less than 100m , m 100 m or more
4.1 Serial input data IEC61162-1, current loop 1 port
RMA L/L, Ground track speed, Track
RMC L/L GPS , Ground track speed, Track, Time
GGA/GLL L/L
VTG Ground track speed, Track true/magnetic selected on menu
DA Time
4.2 Serial output data IEC61162-1, output period 1 sec. 3 outputs/ 1 port
SDDPT Depth m , Draft m
SDDBT Depth ft, m, fa below transducer
SDDB Depth ft, m, fa below keel
SDDBS Depth ft, m, fa below sea surface
4.3 Serial I/O data RS-232C, 1 port
Output Depth, Clock, L/L, Ship s speed, Course
Input Control command for PC
4.4 Alarm Depth, Power Contact closure signal, normal open or normal close,
250 VAC/ 200 VDC, 3A ma .
5.1 Distribution bo FE-720 100/110-115/200/220-230 VAC 0.2 A ma ., 1 phase, 50/60 or
24 VDC 0.6 A
5.2 Digital depth indicator 24 VDC, 0.15A
6.1 Temperature -15 C to 55 C
6.2 Relative humidity 93 at 40 C
6.3 Degree of protection
Display unit, Digital depth indicator IP 5
Distribution bo , Matching bo IP 2
6.4 Vibration IEC 60945
6.5 EMC IEC 60945
7.1 Display unit Panel N3.0, Chassis 2.5G 5/1.5 fi ed
7.2 Digital depth indicator Panel N3.0, Chassis 2.5G 5/1.5 fi ed
7.3 Distribution bo FE-720 2.5G 5/1.5 or 7.5BG7/2
7.4 Distribution bo MB-1200 N3.0
7.5 Matching bo 2.5G7/2 fi ed