Furuno FELCOM 12 - Switching between Files; Opening a File Where a Working Area Is Occupied

3-11
Switching between files
You can switch between files by selecting Change Window in the
Edit menu. Figure 3-20 illustrates how to switch between files with
Change Window.
1 [F2]
2 9: Change Window
[Enter], or
[ALT] + [V]
How to alternate display of files in working area 1 and 2.
FURUNOABC
Figure 3-20 How the change window feature works
Opening a file where a working area is occupied
When you try to load a file into an occupied working memory, the
display asks you if you want to save the file in that memory before
clearing the display.
Save this message?
No
Yes
Figure 3-21 Prompt for closing a file
To save the file, press [Enter]; select “No” and press [Enter] if you do
not need to save the file. The file screen is erased and then the un-
titled window appears.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
<[1] B:\SEIZOUSE>
NT THAT YOU WILL ENJOY MANY YEARS OF OPERATION WITH
STANDARD C MOBILE EARTH STATION FELCOM 12
S ON YOUR CHOICE IF FURUNO FELCOM 12 t .
----
*
--------- + --------- + --------- + --------- + --------- + --------- + --------- <
File
1. New
2. Open
3. Close
4. Save
5. Delete
6. Rename
7. Print
8. Format Disk
9. MIME (Decode)
ALT-N
ALT-O
ALT-Q
ALT-S
ALT-D
ALT-P
ASCII [Insert ]
Save
[B:\SEIZOUSE ]
To View: SPACE Make Dir: INS Remove Dir: DEL
901
42
42
868
372
6794
864
1910
97-07-28 20:54
97-07-15 02:13
97-07-14 05:42
97-07-15 02:33
97-07-15 02:52
97-07-15 02:59
97-07-15 03:13
97-07-15 03:48
Filename Size Date & Time
ABC 281 .
COIEKI .
COMTEST .
E0970715.001
E0970715.002
E0970715.003
E0970715.004
E0970715.005
74 Files exist 578560 bytes free
Figure 3-22 Save screen
Enter file name followed by [Enter]. The editing screen appears.