10 NBDP FILE OPERATIONS
10-7
2. Type the word you want to find. Use the Choose Forward or Backward to search the file
in a forward or backward direction respectively from the cursor position. Press the
[Enter] key to begin the search.
When the unit finds the word, the cursor stops at the first character of the word. Press the
[Enter] key to continue the search. If the string could not be found, the message “Not Found
(To quit: ESC)” appears. Press the [Esc] key to quit.
10.4.5 Replacing text
The Replace feature helps you replace every occurrence of a word or phase with another
word or phase in a file.
1. Press the function key [F2] and the [7] key. The Replace display appears.
Replace
Search string :
Replace with :
To quit: ESC
Forward
---------------
Forward
Backward
Dir
Query
All
Mode
Replace screen
2. Type the word you want to replace on the "Search string" line.
3. Press the [↓] key to choose "Replace with." Type the new word.
4. Use the [↑] or [↓] key to choose Forward or Backward to search the file in a forward or
backward direction respectively from the cursor position.
5. Use the [↑] or [↓] key to choose whether you want to be queried or not each time the
word is found.
Query: Stop at each occurrence of word to answer yes or no to replacement.
All: Replace every occurrence of word without stopping to confirm.
6. Press the [Enter] key to start the replacement.
10.4.6 Goto line
The Goto line feature places the cursor at the head of a line desired.
1. Press the function key [F2] and the [0] key. The following display appears.
Goto Line
Jump to Line No. :
Goto line screen
2. Key in line number and press the [Enter] key. The cursor shifts to the head of the line
selected.
To Next Page
Loading...
