11 NBDP TRANSMITTING, RECEIVING
11-12
11.9.3 Commands
The tables which follows describe the commands for macro operation
Command
(Prefixed with @)
Parameter Content
CALL S: Station Name Calling station name and ID on assigned
parameter
Two digits, 0-99 min. Free-signal searching time according to
assigned parameter (default setting: 10
min)
FREE (support
command for CALL)
$RRR$ signal Detect free signal of dot pattern
RETRY (support
command for CALL)
Two digits, 0-99 min. Calling according to assigned parameter
(default setting: 10 min)
CASE Text For receiving a message (designated by
parameter) transmitted by coast station
TIMEOUT (support
command for CALL)
Two digits, 0-99 min. Time allotted for reception of message by
CASE command
Text Text transmitted according to assigned
parameters
SEND
B file name (IB-581)
A:
file name (IB-583)
Send a file from floppy disk
WRU
HR
OVER
BREAK
None Function keys F7 – F10
DISPLAY Text Text of message appears
INPUT None Waiting for keyboard input
Transmit keyboard input message
Commands processed by Danish coast station Lyngby
Command Function
BRK+ Disconnection communications line
DIRTLX ……+ Direct dialing telex (receive only)
KKKK Terminate message
LTR+ For telex letters mailed from Operations Station to destinations worldwide
MED+ Request medical advice
OPR+ Requesting operating assistance
POS+ Send position data
STA+ Status requested on a store-and-forward message
TLX ……+ Store-and-forward method
For details, consult the coast station’s traffic manual.
To Next Page
Loading...
