2 SSB RADIOTELEPHONE
2-2
2.1.2 Choosing channel, frequency
Choosing channel
1. Rotate the [ENTER] knob to choose CH and then push the [ENTER] knob.
MODE: SSB SIMP HIGH
CH: 800
TX: 2182.0 KHZ
RX: 2182.00 KHZ
VOL
SEN
S
AGC : FAST
IA 0.0A
200
2. Channel can be entered directly with the numeric keys, or by using the [ENTER] knob.
See below for details.
Entering band and band channel with the numeric keys: Use the numeric keys to
enter band and band channel and then push the [ENTER] knob.
Choosing band and band channel with the ENTER knob:
a) Use the [FILE/CURSOR] key to place the cursor in the band or band channel position,
whichever you want to change.
200
200
Cursor position for
selection of band channel
Cursor position for
selection of band
b) Rotate the [ENTER] knob to set band (or channel) desired.
2 4 6 8 12 16 18 22 25 01 02----- 029
ITU band User band
Setting Range
ITU Band: 2/4/6/8/12/16/18/22/25
User Band: 001-029 (leadiing zero necessary)
ITU Channel: XX01 - XX236 (rendering on band or mode)
User Channel: XXX01 - XXX99
c) Push the [ENTER] knob. The TX and RX frequencies of the channel entered
appear.
To Next Page
Loading...
