10 NBDP FILE OPERATIONS
10-9
10.6 Renaming Files
To rename a file, do the following:
1. Press the function key [F1].
2. Press the [5] key.
3. Use the [↑] or [↓] key to choose a file and press the [Enter] key.
4. Enter a new name.
5. Press the [Enter] key.
10.7 Saving a File Under a New Name
You may save a file under a new name as follows:
1. Open a file.
2. Edit the file as necessary.
3. Press the function key [F1].
4. Press the [3] key to save the file.
5. Press the [Y] key.
6. Press the [Backspace] key to erase the original name and then enter a new name.
7. Press the [Enter] key.
10.8 Deleting Files
Insert appropriate floppy disk in the drive and do the following to delete unnecessary files.
1. Press the function key [F1].
2. Press the [4] key.
3. Use the [↑] or [↓] key to choose the file to delete and then press the [Enter] key.
4. Press the [Enter] key again. (To cancel, press the [↓] key to select NO followed by the
[Enter] key.)
10.9 Real Time Printing
An incoming or outgoing message can be printed out while it is being received or
transmitted.
1. Press the function key [F1] to display the File menu.
2. Press the [6] key to turn real time printing on/off.
“Print” appears in reverse video at the top of the display.
To Next Page
Loading...
