Furuno FS-1570 - Timer Operation; Enabling Timer Operation

11 NBDP TRANSMITTING, RECEIVING
11-8
Command and abbreviation
dnammoCnoitcnuF
+MGT.margeletoidarasiegassemgniwollofehttahtetacidnioT
+GSM .dlehegassemynayletaidemmidetcennocebotsdeennoitatspihsehttahtetacidnioT
+RPO.rotarepollaC
+GRU.egassemssertsiddnaycnegru,ytefaS
+DEM.ecivdalacidemtseuqeR
+TSET .noitatspihsehtgnikcehcrofegassemtsetadnesotnoitatstsaoctseuqeR
+KRB.noitatstsaocehthtiwnoitcennocehtraelcoT
noitaiverbbA
+AG.dnammocruoytimsnarT.ydaermaI
MOM.tnemomatiaW
+GSM.erohsehtmorfsegassemgnidneptseuqeR
NNNNroKKKK.egassemaetanimreT
11.6 Timer Operation
A built-in timer permits automatic transmission and reception of telex messages.
11.6.1 Enabling timer operation
1. Press the function key [F3] to display the Operate menu.
2. Press the [7] key to display the Timer Operation List.
3. Choose the operation (name) you wish to execute. Press the [Enter] key. An asterisk
appears beside the operation selected and "T. Op" appears in reverse video on the
communication status display. If a file stored on a floppy disk is to be sent, be sure the
floppy disk containing the file is inserted in the drive.
*1
2
3
OP4
OP5
Timer Operation List
Timer operation list
4. Choose another operation (name) if desired.
5. Press the [Esc] key.