9-1
9 NBDP PREPARATIONS
This chapter provides the procedures necessary for preparing the NBDP Terminal Unit for
transmitting and receiving. For automatic telex, you will need to register the following:
• Your ship's ID and answerback codes
• Stations
• Timer programs
• Scan channel groups
• User channels
9.1 Registering Answerback Code & ID Codes
Enter your ship's answerback code and ID codes as shown below.
Note: The answerback and ID codes cannot be changed once entered; be sure to enter the
codes correctly.
9.1.1 Registering answerback code
1. Press the function key [F5] and then the [5] key. The display should look something like
the illustration below.
Answerback Code
Answerback Code Entry
Answerback code entry screen
2. Enter your ship's answerback code (max. 20 characters, including spaces) and press the
[Enter] key. The prompt OK/CANCEL asks for verification of data. If the code is correct,
press the [Enter] key again.
Note: Example of answerback code: 12345789 ABCF X.
To Next Page
Loading...
