10 NBDP FILE OPERATIONS
10-6
10.4.6 Goto line
The Goto line feature places the cursor at the head of a line desired.
1. Press the function key [F2] and the [0] key. The following display appears.
Goto Line
Jump to Line No. :
Goto line screen
2. Key in line number and press the [Enter] key. The cursor shifts to the head of the line
selected.
10.4.7 Goto top, Goto bottom
You can easily go to the top or bottom line of a file. Press [F2], [8] to go to the top line; press
[F2], [9] to go to the bottom line.
10.5 Opening Files
Two working areas (called working area 1 and working area 2) are provided to which you
can load a file, and one file may be displayed on the LCD.
10.5.1 Opening a file
1. Press the function key [F1] to display the File menu.
2. Press the [2] key. A chronological list of files on the floppy disk appears.
3. Choose a file.
4. Press the [Enter] key.
The file appears and the title bar shows the file name. You may repeat this procedure to
load another file into a working area.
Note: When both working areas are occupied the message “File can’t open” appears.
Close an open file in order to open another file.
10.5.2 Switching between files
Two files can be opened and one displayed on the LCD. To switch between files do the
following:
1. Press the function key [F2].
2. Press the [A] key to switch files.
To Next Page
Loading...
