3-4
3.3 Antenna Height
1. Press the [MENU] key.
2. Press the software key labeled "GPS/DGPS/TD OPTIONS".
3. Press the software key labeled "GPS SETUP OPTIONS".
4. Select "ANT. HEIGHT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following
message.
ANT. HEIGHT
0 0 5 m
Figure 3-4 Antenna Height Display
6. Enter the height (3 digits) of the antenna above sea level using
the numeric keys.
If you enter wrong antenna height, press the software key labeled
"CLEAR".
7. Press the [ENTER] key.
8. Press the [PLOT] key to finish.
To Next Page
Loading...
