6-1
6. FISH FINDER
6.1 Fish Finder Display
The quick settings shortcut gives you access to regularly used settings such as gain
adjustment and TVG, as well as other settings. Tap the cog icon to show the quick set-
tings menu. This chapter uses the term “Open the menu.” when referring to this pro-
cedure.
To close the quick settings menu, tap anywhere outside the menu, or tap the [<] icon
at the top-left corner of the menu. This chapter uses the term “Close the menu” to refer
to both methods.
6.2 How to Set Up the Transducer
To set up the transducer, follow the procedure below.
Note: This procedure is not required for transducers with a TD-ID.
1. From the [Home] screen, tap [Settings].
2. Tap [Fish Finder] => [Initial Setup] => [Transducer].
3. Select the transducer you have equipped from the list.
4. Close the menu.
[
Home
]
icon Time mark
Depth
Frequency toggle
Gain mode and value
Quick settings shortcut
Depth scale
To Next Page
Loading...
