EasyManua.ls Logo

Furuno GP-1871F - How to View the Notifications List; Notification Types; How to Filter the Notifications List; How to Save the Notifications List to a Microsd Card

Furuno GP-1871F
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10. NOTIFICATIONS
10-6
10.7.1 How to view the notifications list
From the [Home] screen, tap [Lists] => [Notices and System Messages].
10.7.2 Notification types
The system uses three types of notifications.
Alert notifications: notification related to your vessel, navigation and surroundings.
System notifications: system-based messages (includes notifications from connect-
ed equipment).
10.7.3 How to filter the notifications list
You can apply a filter to the notifications list, reducing the number of notifications dis-
played and making it easier to find a specified notification.
1. From the [Home] screen, tap [Lists] => [Notices and System Messages].
2. Tap the [Menu] button at the top-right of the list. The filter settings appear.
3. At [Show by Type], select the filter type you want to use.
[All]: shows all notifications unfiltered.
[Notifications]: shows only alert notifications.
[System]: shows only system notifications.
4. At [From], select the start date from which you want to view notifications.
5. At [To], select the date up to which you want to view notifications.
6. Tap the [<] icon to close the filter settings.
10.7.4 How to save the notifications list to a microSD card
1. Tap the [Menu] button at the top-right corner of the [Notifications] list.
2. Tap [Save all on SD]. The list is saved in “.csv” format (comma separated values).
Note: If there is no SD Card inserted other than a chart card, an error message ap-
pears. Insert a blank SD Card then repeat the above procedure.

Table of Contents

Other manuals for Furuno GP-1871F

Related product manuals