Furuno GP-30 Operator's Guide

Selecting Display Mode
Press the [DISP] key.
Plotter Display
2D
[ 5 ]
n
m
CSE:
7°
SPD:
0.0
k
t
34°44.000N 135°21.000E
X
x
Highway Display
X
CSE
BRG
RNG
SPD
7°
---°
---
n
m
6.5
k
t
N
0.5
0.5
XTE:
0.05
n
m
Steering Display
X
2D MAG
05:32
NE
30 60
300 330
SPD:
6.5
k
t
CSE:
20°
RNG: --.-
n
m
BRG:
---°
TTG:
ETA:
1H30M 12:30
Nav Data Display
X
2D
12–DEC–97 15:37:40
SPD:
CSE:
34° 44. 000'
135° 21. 000'
N
E
kt 7°6.5
GP-30/35 GPS NAVIGATOR
Operator's Guide
The purpose of this operator's guide is to provide the basic operating procedures for this
equipment. For detailed information, refer to the operator's manual.
Enlarging, Shrinking the
Display
1. Press the [MENU] key.
2. Press the [ENT] key.
3. Press ▲ to enlarge; ▼ to shrink.
4. Press the [ENT] key to close the window.
Shifting the Cursor, Display
1. Press the Cursor Pad to turn on and shift
the cursor.
2. Place the cursor on an edge of the screen
to shift the display.
Centering Own Position
1. Press the [MENU] key.
2. Select “SHIP TO CENTER?”.
3. Press the [ENT] key.
Entering MOB Mark
1. Press the [MARK/MOB] key.
2. Select “MOB?”.
3. Press the [ENT] key.
4. Press the [ENT] key again.
Ship's track and
data
3D view of ship's
track overlaid on
intended course
Graphic display
of steering data
Comprehensive
navigation data
display

Furuno GP-30 Specifications

General

Brand	Furuno
Model	GP-30
Category	GPS
Language	English