Need help?Do you have a question about the Furuno GP-330B and is the answer not in the manual?
Lists all standard and optional equipment included with the GPS receiver.
Lists necessary tools and materials required for the installation process.
Provides guidelines and diagrams for selecting an optimal mounting position for the GPS receiver.
Step-by-step instructions for installing the GPS receiver using a pole or rail mount.
Step-by-step instructions for installing the GPS receiver onto a deck surface.
Step-by-step instructions for installing the GPS receiver using a flush mount configuration.
Details the CAN bus connection for Type A or N configurations.
Explains connecting the GPS receiver to a backbone cable via T-type connectors for network configuration.
Instructions on how to route and connect the CAN bus cable assembly to the device.
Instructions for connecting the GPS receiver using the NMEA 0183 interface for Type B or N configurations.
Configuration settings for the GP-330B when used with the NavNet vx2 system.
Provides guidance on basic maintenance procedures for the GP-330B GPS receiver.
Lists common issues and checks to perform when the GPS receiver is not functioning correctly.
Details the NMEA 0183 sentences transmitted and received by the GPS receiver.
Lists the NMEA 2000 PGN commands transmitted and received by the GPS receiver.
To Next Page
General
