LH-5000 Operator’s Manual
Note
The intercom speaker name appears in the bottom line of LCD.
To rename the name, see 2.16 Renaming the Intercom Station.
Step 2 Press and hold the PTT key on the microphone and speak into the
microphone.
The following information appears on the screen.
Step 3 Release the PTT key to receive.
Step 4 After completing your conversation, press the ALL key to return to
the home screen, or press the same selected key (IC1-IC6) to back to
previous mode.
2.9 Receiving a Call from an Intercom
Speaker
When one or multiple calls from an intercom speaker arrive, you can receive
the call manually or automatically. If only one call was received, IC number
and IC name will flash on the screen. When multiple calls arrive, the IC name
and IC number will appear in turn every four seconds.
To Next Page
Loading...
