Furuno NavNet TZtouch2 TZTL12F Setup Procedures

2
1. Integration with FLIR M-Series
2. Network Overview
3. Setting up FLIR M-Series
3-1 Assigning Static IP Address – For NavNet TZtouch and TZtouch2
3-2 Additional Setup – For NavNet TZtouch2 Only
4. Setting up NavNet TZtouch and TZtouch2
4-1 NavNet TZtouch Models TZT9/14/BB
4-2 NavNet TZtouch2 Models TZTL12F/15F
5. Troubleshooting
5-1 “No FLIR Detected” – For NavNet TZtouch and TZtouch2
5-2 “FLIR Detected but CGI Service Is Not Available” – For NavNet TZtouch2 Only
INDEX

Furuno NavNet TZtouch2 TZTL12F Specifications

General

Brand	Furuno
Model	NavNet TZtouch2 TZTL12F
Category	Monitor
Language	English