Need help?Do you have a question about the Furuno RC18xx Series and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | RC18xx Series |
| Category | Music Mixer |
| Language | English |
Overview of the FURUNO USA GMDSS Console and its purpose.
Describes the mechanical layout for RC1815/RC1825 models.
Details the mechanical layout for the RC1840 model.
Provides mechanical drawings for the A3 GMDSS Console.
Details the methods for mounting the RC18xx console unit.
Explains the grounding procedures for the console.
Covers mounting power supplies, batteries, and chargers.
Details electrical and NMEA/IEC-61162 connections for RC18xx.
Outlines the battery requirements for RC18xx consoles.
Details the electrical connections for the console.
Covers the PR-850A power supply connections.
Details NMEA/IEC-61162 connection procedures.
Details the installation of the optional DMC-5.
Covers the installation of the Felcom 15 unit.
Details the installation process for the FM-8500.
Installation guide for FS-1570/FS-2570 units.
Antenna connection for DSC/Watch Receiver.
NMEA/IEC-61162 connection for FS-1570/FS-2570.
Installation steps for the IB-583 NBDP Terminal.
General setup procedures for RC1815/RC1825 equipment.
Setup and testing for the optional DMC-5.
Setup for SES input on DMC-5.
Setting time and date for DMC-5.
Setup instructions for the Felcom 15 unit.
Setup procedures for the FM-8500 equipment.
Configuration of RT settings for FM-8500.
Setting protection parameters for FM-8500.
Setup instructions for FS-1570/FS-2570 units.
Setup procedures for the IB-583 NBDP Terminal.
Installation of the optional DMC-5 for RC1840.
Installation steps for the DP-6 NBDP Terminal.
Installation of the DSC-60 DSC/Watch Receiver.
Installation procedures for Felcom 15 unit on RC1840.
Installation of the FM-8500 equipment on RC1840.
Installation steps for the FS-5000 equipment.
Installation of the AT-5000 antenna coupler.
General setup procedures for RC1840 equipment.
Setup for the optional DMC-5 on RC1840.
Setup for SES input on DMC-5 for RC1840.
Setting time and date for DMC-5 on RC1840.
Setup procedures for the DP-6 NBDP Terminal.
Setup for the DSC-60 DSC/Watch Receiver.
Setup instructions for Felcom 15 unit on RC1840.
Setup procedures for FM-8500 equipment on RC1840.
Configuration of RT settings for FM-8500 on RC1840.
Setting protection parameters for FM-8500 on RC1840.
Setup instructions for the FS-5000 equipment.
Preset tuning for 2182 kHz on FS-5000.
Lists components for the installed FM-8500.
Lists components for the boxed FM-8500.
Lists components for FS-1570/FS-2570 installed units.
Lists cables for FS2570C.
Lists components for the Felcom 15 IC-215 unit.
Lists components for the IC-115 Antenna.
Lists components for the IC-305 Distress Unit.
Lists components for the IC-306 Alarm Unit.
Lists installation materials for IC-315.
Lists components for the IB-583 NBDP Terminal.
Lists general GMDSS installation materials.
Lists items included in the crate.
Lists components for the FS-5000 Transceiver.
Lists cables for the FS-5000.
Lists components for the FS-5000 Control Unit.
Lists components for the DP-6 Main Unit.
Lists components for the DP-6 Terminal Unit.
Lists components for the Felcom 15 IC-215 unit.
Lists components for the IC-115 Antenna.
Lists components for the IC-305 Distress Unit.
Lists components for the IC-306 Alarm Unit.
Lists installation materials for IC-315.
Lists components for the installed FM-8500.
Lists components for the boxed FM-8500.
Lists GMDSS installation materials for DSC-60.
Lists general GMDSS installation materials.
Lists items included in the crate.
To Next Page