1. OPERATION
1-7
Selecting the display range for the highway display
You may select the display range for the highway display among 0.2, 0.4, 0.8, 1,
2, 4, 8 and 16 nautical miles. (Nautical miles is the default range unit; kilometer
and statute mile are also available. See page 1-23.)
1. Press the [DISP] key to show the highway display and then press the [MENU]
key to show the zoom window.
ZOOM IN/OUT?
PRESS [MENU] TO SEE
THE MAIN MENU.
Quit?
Zoom window
2. Press the [ENT] key to show the zoom setting window.
IN
OUT
▲
▼
0.2
EXIT:
[ENT]
n
m
ZOOM
Zoom setting window
3. Press ▲ or ▼ to select zoom range desired. Setting range is shown in the
table below.
4. Press the [ENT] key to finish.
Unit Display range
nm 0.2, 0.4, 0.8, 1, 2, 4, 8, 16
km 0.2, 0.4, 1, 2, 4, 10, 20, 30
sm 0.2, 0.4, 0.8, 1, 2, 4, 8, 16
To Next Page
Loading...
