What to do if my Furuno Compass cannot turn on?
If your Furuno Compass won't turn on, there might be a few reasons. First, ensure the power cable on the processor unit is firmly connected. Another potential cause is a power supply failure, so check the power supply. Finally, a blown fuse could be the culprit, in which case you should have a qualified technician check the fuse.
Why heading output from Furuno Compass SC-50 does not appear on external equipment?
If the heading output from your Furuno Compass SC-50 isn't showing up on external equipment, the connection between the SC-50 and the external equipment might have loosened, so firmly fasten the connector. Also, there might be a sensor trouble, so run the diagnostic test1 to determine the cause.
Welcome message, manufacturer's reputation, and key capabilities of the SC-50.
Manual usage, copyright, product and battery disposal instructions.
Essential safety instructions for operators and installers, hazard symbols, and precautions.
Details the SC-50 system components, their roles, and interconnections.
Lists all standard and optional equipment included with the SC-50.
Covers general performance, display, power, environmental, and coating specifications.
Guidance on selecting mounting locations for antenna, processor, and display units.
Step-by-step instructions for installing antenna, processor, and display units.
Covers general wiring, cable fabrication, and connecting external equipment.
Procedures for confirming satellite status and setting up the system.
Explanation of the unit's controls, power management, and display adjustments.
Details the various display modes and how operational data is presented.
Guides through GPS, WAAS/DGPS, system, and other menu settings.
Instructions on configuring heading data output, log pulse, and other data streams.
Recommended regular checks and cleaning procedures for optimal performance.
Solutions for common problems, diagnostic tests, and error message interpretation.
Guides on clearing data, replacing battery/fuse, and managing system data.
Includes menu tree, digital interface, ports, parts list, geodetic codes, principles, and terminology.
Lists all components provided in the product packaging.
Detailed drawings showing unit dimensions, mounting hole locations, and clearances.
Illustrates the electrical connections between all SC-50 components and external devices.
Formal statement confirming the product's compliance with relevant standards and directives.
To Next Page
General
