1. OPERATION
1-34
1.10 Enabling/Disabling Alarm Buzzer, Key Beep
You may turn on or off the buzzers that sound for alarms or incoming
messages. Further, you may turn off the beep, which sounds for valid key input.
Note that the alarm buzzer is not related to a radar or ECDIS alarm.
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
[USER SETTINGS]
KEY BEEP : ON
ALARM BUZZER : ON
AUTO SORT : ON
DISP SART TEST : ON
LR MODE : AUTO
RECEIVED MSG
CPA/TCPA ALARM
3. Select KEY BEEP or ALARM BUZZER as appropriate then press the ENT
key.
4. Select ON or OFF as appropriate then press the ENT key.
5. Press the DISP key to close the menu.
To Next Page
Loading...
