2. INLAND AIS
2-16
3. Select ETA/RTA then press the ENT key.
[ETA/RTA]
CREATE MSG
ETA LOG
RTA LOG
4. CREATE MSG is selected; press the ENT key.
[CREATE MSG]
SET MSG TYPEE
SET DESTINATION
SET ETA
SEND MSG
5. SET MSG TYPE is selected; press the ENT key.
[SET MSG TYPE]
MMSI : 000000000
CHANNEL: ALTERNATE
RETRY TIMES: 3
MMS
6. MMSI is selected; press the ENT key.
7. Enter the MMSI of the lock/bridge/terminal you want to pass through then
press the ENT key.
8. CHANNEL is selected; press the ENT key.
ALTERNATE
BOTH A & B
A
B
9. Select the channel over which to send the message then press the ENT
key.
10. RETRY TIMES is selected; press the ENT key.
11. Enter the number of times to re-send the message (if the first transmission
is unsuccessful) then press the ENT key. An ETA message can be resent a
maximum of three times.
12. Press the MENU key to return to the CREATE MSG menu.
To Next Page
Loading...
