Fusion MS-AV700i - Zone Configuration

36
SETTING UP THE 700 Series
ZONES
AVULHUKHYLWV^LYLKI`[OLVUIVHYK*SHZZ+HTWSPÊLY,_[LYUHS
HTWSPÊLYZHYLYLX\PYLK[V\[PSPaL[OLSPULV\[W\[ZHUKZ\I^VVMLYV\[W\[Z
You can pre-set the balance, volume limit, sub-woofer level and name for each
VM[OLMV\YAVULZH]HPSHISLVU[OL:LYPLZ0MYLX\PYLK`V\JHUHSZV!
r ,UHISLVYKPZHISLAVULZHUKAVULPZHS^H`ZLUHISLK
r ,UHISLVYKPZHISL]VS\TLJVU[YVSAVULZHUKVUS`
r 3PURAVULZHUK
For further details, see instructions below.
Selecting and setting up a zone
To select a Zone and modify its settings:
1. Press the Menu key.
2 ;\YUHUK[OLUWYLZZ[OL,UJVKLY[VZLSLJ[Settings > Zone.
3. ;\YUHUK[OLUWYLZZ[OL,UJVKLY[VZLSLJ[[OLAVUL`V\^PZO[V^VYR^P[O
4. Use any of the following instructions to update settings for the selected Zone.
Enabled
AVULZJHUILKPZHISLKPMYLX\PYLK;OPZPZ\ZLM\SMVYL_HTWSLPMVUS`[^V
Zones have been set up, as disabled Zones are not displayed in any screens
when setting levels.
To enable or disable the selected Zone:
a. Select the Enabled menu item.
I 7YLZZ[OL,UJVKLY[VLUHISLVYKPZHISL[OLZLSLJ[LKAVUL
c. Press any key to exit
Menu key
Rotary
Encoder