Fusion MS-UD/AV755 Series

Cable Connector in
Dock
Devices
Micro-USB connector Supported media players. See www.fusionentertainment.com.
Apple 30-pin connector Apple iPhone
®
4s.
iPod touch
®
(5th generation).
Apple Lightning
™
connector
Apple iPhone 7 Plus, iPhone 7,iPhone 6s Plus, iPhone 6s,
iPhone
6 Plus, iPhone 6, iPhone 5s, iPhone 5c, and iPhone 5.
iPod touch (6th generation) and iPod nano
®
(7th generation).
You also can connect a FAT32- or NTFS-formatted USB flash drive directly to the
USB port.
Connecting a USB Device Using the USB Cable
You can connect a USB device to the USB cable on the back of the stereo.
1
Locate the USB cable on the back of the stereo.
2
Connect the USB device to the USB port.
Connecting a Compatible
Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth
wireless connection.
You can control the music playback with the media app on a Bluetooth device or
using the FUSION-Link
™
smartphone app. For information about the FUSION-
Link app for compatible Apple or Android devices, go to the AppleApp Store
SM
or
the Google Play
™
store.
1
Select the Bluetooth source.
2
Select
> Discoverable to make the stereo visible to your compatible
Bluetooth
device.
3
Enable Bluetooth on your compatible Bluetooth device.
4
Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
5
On your compatible Bluetooth device, search for Bluetooth devices.
6
On your compatible Bluetooth device, select the stereo from the list of
detected devices.
7
On your compatible
Bluetooth device, follow the on-screen instructions to pair
and connect to the discovered stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a
code on the stereo. The stereo does not display a code, but it does connect
correctly when you confirm the message on the Bluetooth device.
8
If your compatible Bluetooth device does not immediately connect to the
stereo, repeat steps 1 through 7.
To prevent interruption to audio streaming over Bluetooth wireless, you can turn
off the Discoverable setting after pairing a Bluetooth device to the stereo.
Bluetooth Range Information
The stereo and Bluetooth wireless devices have a range of 10 m (33 ft.). For
optimal performance, the Bluetooth wireless device should also have a clear line
of sight to the stereo.
Inserting a DVD or CD
NOTE: For best results, before you insert the disc, make sure the disc is not
scratched or damaged. If necessary, clean and dry the disc with a clean, soft,
and lint-free cloth. Avoid touching the surface of the disc, and avoid exposure to
direct sunlight.
DVD and CD playback is available on AV models only.
1
Slide the button on the top of the stereo, and pull down to open the door.
2
Insert the disc with the label facing up.
3
Close the door.
The source automatically changes to the DVD source.
Setting the DVD Region
You must select the DVD region in order to play a DVD.
1
Select > DVD Region.
2
Select the region.
Quick Start Manual 5
DRAFT