FUTABA 7C-2.4GHz - Throttle Mixing (SWASH-THR)

Throttle mixing (SWASH-THR):
GOAL of EXAMPLE: STEPS: INPUTS:
72
Activate SWASH-THR mixing. Adjust
mixing amount (AIL-N) to 10%.
Where next?
Open the SWASH-THR function.
Activate the function.
Adjust the mixing amount as needed.
(Ex: 10%)
Close menu.
for 1 second.
(If basic, again.)
to SWASH-THR.
to 10%.
View additional setups on the internet: www.futaba-rc.com\faq\faq-7c.html.
SWASH-THR mixing corrects slowing of engine speed caused by swash plate
operation due to aileron or elevator operation.
Engine speed can be increased independently at aileron or elevator operation in
each flight condition (normal/idle-up 1/idle-up 2.)
Adjustability:
• Rate: 0% to 100%, with a default of 0%.
• SWASH-THR does not affect the throttle servo when the throttle control stick is all
the way up or the idle position without affecting throttle settimgs.