FUTABA 7C-2.4GHz - Contents and Technical Specifications

•
R617FS Receiver
•
Servos, S3004, S3152 or S3001, with mounting
hardware and servo arm assortment
•
Switch harness
•
Extension cord
•
Receiver battery
•
Transmitter battery or battery holder
•
1
(The contents depend on the type of set.)
10V wall charger (North America)
Transmitter T7C-2.4G
7-channel transmitter of FASST system.
Transmitting on 2.4GHz band.
Operating system: 2-stick, 7 channels
Power supply: 9.6V NT8S600B Ni-Cd battery
Current drain: 170 mA
Receiver R617FS
7-channel receiver of FASST system.
Receiving on 2.4GHz band.
Power requirement: 4.8 or 6.0V Ni-Cd battery or
regulated output from ESC, etc.
Note: NEVER use dry battery for R617FS as it
cause malfunction.
Current drain: 80mA (at no signal)
Size: 1.64 x 1.08 x 0.36 (41.6 x 27.5 x 9.2 mm)
Weight: 0.34 oz (9.8 g)
Channels: 7
Servo S3152 ( Standard, digital )
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8V (from receiver)
Output torque: 69.4 oz-in(5.0 kg-cm) at 4.8V
Operating speed: 0.22 sec/60 at 4.8V
Size: 1.57 x 0.79 x 1.50 (40 x 20 x 38.1 mm)
Weight: 1.51 oz (42.8 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 41.7 oz-in (3.0 kg-cm)
Operating speed: 0.22 sec/60
Size: 1.59 x 0.78 x 1.41 (40.4 x 19.8 x 36 mm)
Weight: 1.59 oz (45.1g)
Servo S3004 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 44.4 oz-in (3.2 kg-cm) at 4.8V
Operating speed: 0.23 sec/60 at 4.8V
Size: 1.59 x 0.78 x 1.41 (40.4 x 19.8 x 36 mm)
Weight: 1.31 oz (37.2 g)
9
CONTENTS AND TECHNICAL SPECIFICATIONS
(Specifications and ratings are subject to change without notice.)
Your 7C-2.4GHz (packaged with a 7-channel FASST receiver) system includes the following components: