:STUPNI:SPETS:ELPMAXEfoLAOG
77
Switch between the governor settings
automatically when changing conditions.
Consider setting the battery FailSafe
settings and other helpful functions on
the GV-1 itself.
Where next?
Open and activate the GOVERNOR
function.
Optional: change switch assignment
to select governor settings. Ex: select
switch that selects the conditions.
Adjust governor speed settings per
switch position or condition as needed.
(Ex: defaults are fine.) Allows head
speed adjustment from transmitter.
Close the function.
for 1 second.
(If basic, again.)
to GOVERNOR.
to ON.
to SW.
to E.
to each S
WITCH position.
or as needed.
to next SWITCH position. Repeat.
GYRO: see p. 73.
Adjust FailSafe (F/S ) settings (p. 40).
Adjust elevator/aileron response to fit your flying style: see D/R,EXP and END
POINT/SWASH AFR: p. 33, 31, 63.
To Next Page
Loading...
