FUTABA CGY750 - AILERON;ELEVATOR GYRO SETUP; Finishing Setup and Gain Adjustment

A
ILERON
/E
LEVATOR
G
YRO
S
ETUP
Finishing the setup:
Using the T8FG, T12FG, T12Z and 14MZ Re-
mote Gain Functions (roll, pitch and yaw)

  
     

  

     






      






58
󾾝
WARNING
￸
Verify that the gyro compensates in the cor-
rect direction for all three axis before flight. If
the compensation direction is incorrect, the
model will roll, flip, or pirouette uncontrollably at
a very high rate.