FUTABA CGY750 - S.Bus Channel Assignment

S.BUS B
ASIC
S
ETTING
89
(2) S.Bus setting: Aileron
channel [default: 1ch]
Using the data [+] or [-] keys to
set the correct channel number.
(3) S.Bus setting: Elevator
channel [default: 2ch]
Using the data [+] or [-] keys to
set the correct channel number.
(4) S.Bus setting: Throttle
channel [default: 3ch]
Using the data [+] or [-] keys to
set the correct channel number.
(5) S.Bus setting: Rudder
channel [default: 4ch]
Using the data [+] or [-] keys to
set the correct channel number.
(6) S.Bus setting: Pitch chan-
nel [default: 6ch]
Using the data [+] or [-] keys to
set the correct channel number.
(7) S.Bus setting: AIL gain
channel [default: 9ch]
Using the data [+] or [-] keys to
set the correct channel number.