FUTABA R404SBS - Steering Wheel Arrangement

21
5°
10°
●
Changing the wheel position
The wheel position can be oset by
using the accessory APA wheel posi-
tion oset adapter. (Two lengths)
●
Angle spacer
The wheel mounting angle can be
changed by using the optional angle
spacer 5°.
●
Modifying for left-hand use
The wheel section left and right in-
stallation direction can be reversed.
●
Angle can be adjusted
The angle can be nely adjusted by adjust-
ing the steering wheel unit installation.
[7.5 ° 48 steps ]
Steering Wheel Arrangement
The operating angle of the wheel can be adjusted
The operating angle of the wheel can be changed from 34 deg to 32 deg by install-
ing the 32 deg wheel adjuster.
If you install the 32 deg wheel adapter, be sure to adjust the scale of the steering
channel accordingly by using the "Calibration Function (System menu)".