EasyManua.ls Logo

FUTABA T26SZ - Page 106

FUTABA T26SZ
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
Setstheangleon
whichthealarm
operates.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
AllowsSpeechtobe
turnedONorOFF.
AllowsSpeechtobe
turnedONorOFF.
Vibratorchoicesare
type1-3,andInhibit.
Vibratorchoicesare
type1-3,andInhibit.
↑Anupwardarrow
indicatesthealarm
willsoundwhenthe
temperaturereaches
aboveyoursetvalue.
↑Anupwardarrow
indicatesthealarmwill
soundwhentheangle
reachesaboveyourset
value.
↓Adownwardarrow
indicatesthealarm
willsoundwhenthe
temperaturereaches
belowyoursetvalue.
↓Adownwardarrow
indicatesthealarmwill
soundwhentheangle
reachesbelowyourset
value.
Initialvalue:↑ +180.0°↓ -180.0°
Adjustmentrange-180.0° ~+180.0°
( Limit≧↓ Limit)
ŷƈƏƈƐƈƗƕƜŃŝŃŶƈƕƙƒŃƖƈƑƖƒƕŃžŷƈƐƓƈƕƄƗƘƕƈƀŃžŤƑƊƏƈƀ
*Servosensormustbeinstalledintheaircraft.
Select [Servo sensor] in the Telemetry screen
and access the setup screen shown below.
Setsthetemperature
onwhichthealarm
operates.
Initialvalue:↑ 115℃↓ -10℃
Adjustmentrange-10℃ ~115℃
( Limit≧↓ Limit)
Return to Linkage
menu
●Temperature
●Angle

Related product manuals