FUTABA T26SZ - Page 107

107
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
●
Select [Current] in the Telemetry screen and
access the setup screen shown below.
●
Return to
Linkage menu
'ULYH
%DWWHU\
6%6&
WR5HFHLYHU
0RWRU
(6&
*Currentsensormustbeinstalledinthe
aircraft.
◆ Alarmsetting
Max.andmin.values
sincethepowerwas
turnedONwilldisplay.
Setsthecurrenton
whichthealarm
operates.
Alarmischosenfrom
Buzzer,Voice,and
Inhibit.
AllowsSpeechtobe
turnedONorOFF.
Tappingthiswilltakeyouto
thesettingsscreenforthe
currentalarm
Tappingthiswilltakeyouto
thesettingsscreenforthe
voltagealarm
Tappingthiswilltakeyouto
thesettingsscreenforthe
consumptioncapacityalarm
↑Anupwardarrow
indicatesthealarmwill
soundwhenthecurrent
reachesaboveyourset
value.
↓Adownwardarrow
indicatesthealarmwill
soundwhenthecurrent
reachesbelowyourset
value.
Type1
Type2
Type3
"Vibrator"type
Ifthefollowingtypesareselected,thetransmitter
willvibrateduringthewarning.
ŷƈƏƈƐƈƗƕƜŃŝŃŦƘƕƕƈƑƗŃƖƈƑƖƒƕŃžŦƘƕƕƈƑƗƀ
The SBS-01C has the capability of measuring
current, voltage and capacity (consumption) from
drive battery all at the same time.
Theconsumptioncapacityisindicated.
Itisn'tthepresentbatterycapacity.