FUTABA T26SZ - Page 109

109
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
◆ RegistertheESCwithtransmitter.
◆ TheregisteredESCwillbedisplayedas"FutabaESC".
ConnectSBM-2totheS.I/Fporton
thebackoftransmitter.
◆ Linkagemenu→Sensor→ 3/3
Registrationtotransmitter
● Callpage3of[Sensor].
*Please note that the proper default slot for this accessory is number
8 (8-15). This sensor uses eight slots. Being made to a start slot are 8,
16, and 24.
ConnecttheSBM-2tothe
transmitterasshown,then
tapRegister.
Registrationiscompletewhen
thisscreenappears
Completeregistrationandremove
SBM-2fromthetransmitter.
◆ TheregisteredHobbywingESCisdisplayedas"HobbywingESC".
FordetailsonHobbywingESCtelemetry
support,refertotheHobbywing
website.
ŷƈƏƈƐƈƗƕƜŃŝŃ
ũƘƗƄƅƄŃŨŶŦŃŰŦŐŜśœūŒŤŏŃŰŦŐŜŔŖœūŒŤŏŃŰŦŐŜŕœœūŒŤ
*FutabaESCmustbeinstalledintheaircraft.