FUTABA T26SZ - Page 114

114
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
TelemetryAlarmDurationandRepeattime
Therepeattimeanddurationtimeforthetelemetryalarm(buzzer,vibrationandspeech)canbeset.
Durationisnotdisplayedwhen
RepeatisINH.
Alarm
output
Durationtime5s
Repeattime8s
OFF OFF OFF
ON ON ON
e.g.Repeattimeis8secondsandDurationtimeis5seconds.
žŧƘƕƄƗƌƒƑŃƄƑƇŃŵƈƓƈƄƗŃƗƌƐƈŃƉƒƕŃŷƈƏƈƐƈƗƕƜŃŤƏƄƕƐƀ
●
Tap the [Telemetry Setting] button in the Linkage menu to
call the setup screen shown below.
Duration
Itisanalarmoutputtime.
Settingrange：1s 〜30s
Initialvalue：INH
Durationvaluehastobelessthan
repeatvalue.
Durationtimeisextendedwhenthe
otheralarmeventoccurs.
Repeat
Itisarepeattimeofanalarm
output.
Settingrange：INH，1s 〜240s
Initialvalue：INH