FUTABA T26SZ - Page 169

169
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
GyrosettingGYA553
SBUSBasicmenu
SBUSBasicmenu
WARNING
AlwaysverifythattheS.BUSfunctionassignments
matchyourtransmitterʼ sfunction(intheFUNCTION
menu)assignments.Ifanychangesaremadewithin
thetransmitterfunctionassignments,thenitwillalso
benecessarytomakethechangeswithintheS.BUS
functionassignments.Tochangethechannel,GYA553
andT26SZmustbeconnected.
Thechannelofeachfunctioncanbechanged.
ReseteachS.BUSfunction.It
returnstotheinitialvalue.
!10CHON
Set the CH for each function according to the transmitter to be used. Any unused functions should be set
to INH (Inhibited).
HoldingPowerC2toC5
Taptomovetotherate
switchingCHsettingpage.
TaptheCHusedforrateswitching
toselectit.
ON-OFFchannelforauto
recovery