FUTABA T26SZ - Page 23

23
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
1.
Remove the battery cover.
2.
Insert the micro SD card into the micro SD card slot.
3.
When the micro SD card is pressed in once again, the
card will be released from the card slot and can be
removed.
ƐƌƆƕƒŃŶŧŃƆƄƕƇŃŋƖƈƆƘƕƈŃƇƌƊƌƗƄƏŃƐƈƐƒƕƜŃƆƄƕƇŌŃŋƑƒƗŃƌƑƆƏƘƇƈƇŌ
The T26SZ transmitter model data can be stored
by using any commonly found micro SD card.
When T26SZ update software is released, the
software is updated using an micro SD card.
The T26SZ is capable of using SD and SDHC
cards (SD:32MB-2GB SDHC:4GB-32GB).
ƐƌƆƕƒŃŶŧŃƆƄƕƇŃƕƈƄƇƈƕŒƚƕƌƗƈƕ
6DYLQJPRGHOGDWDDQGXSGDWH¿OHVUHOHDVHGIURP
Futaba) into the micro SD card, you can use those
files on your T26SZ transmitter. Equipment for
reading and writing SD cards is available at most
electronics stores.
ŶƗƒƕƈƇŃƇƄƗƄ
When you have a problem of saving or reading data
after a long period of use, please get a new micro
SD card.
:HDUHQRWUHVSRQVLEOHIRUDQGR൵HUQRFRPSHQVDWLRQIRU
memory card data that fails or is damaged for any reason.
Be sure to keep a backup of all important data stored in your
micro SD card.
ŬƑƖƈƕƗƌƑƊŒƕƈƐƒƙƌƑƊŃƗƋƈŃƐƌƆƕƒŃŶŧŃƆƄƕƇ
Payattentiontotheproper
orientationoftheSDcard,
asshownhere.
Cardslot
SDCardslot
Aniconwillbedisplayedonthehome
screenwhentheSDcardisinserted.