FUTABA T26SZ - Page 46

46
ڀ ŪŲŃƗƒŃŷŤťůŨŃŲũŃŦŲűŷŨűŷŶ
●
Return to System menu
ŶƒƘƑƇŃƙƒƏƘƐƈŃ
Sound volume setting
This function can set the volume of "Other sound,"
"Warning," and "Voice," respectively.
●
Tap the [Sound volume] button in the System menu to
call the setup screen shown below.
ŶƒƘƑƇŃƙƒƏƘƐƈŃŶƈƗƗƌƑƊŃƐƈƗƋƒƇ
1. When the Sound volume box is tapped, the above
screen will appear.
Therespectivevolume
control
ŧƄƗƈŃƄƑƇŃŷƌƐƈŃƕƈƖƈƗ
The Date and Time shows the total time
that has elapsed since the last "reset".
1. Tap "Total" or "Model" to choose reset.
2. Tap the [Time] button.
3. Tap "Yes" in the next screen to reset the timer.
ŧƄƗƈŃƄƑƇŃŷƌƐƈ
Integrating timer resetting
This function adjusts the Date and Time of the
T26SZ transmitter. The system timer can also be
reset.
●
Tap the [Date and Time] button in the System menu to
call the setup screen shown below.
*The time is displayed on the Home screen.
●
Return to System menu
● Total:Regardlessofamodel,additionaltimein
caseapowersupplyisONisdisplayed.
● Model:Theadditionaltimewhenthepower
supplywassettoONisdisplayedforeverymodel.
2. You can change the sound volume by tapping
the "
▲▲
" "
▲
"

"
▼▼
" "
▼
" button of four items.
*If you tap "
▲
", the volume will increase. If you tap the
"
▼
", the volume will decrease.
● WhentapeachnumericalvalueofClock,a
numericalinputbarwillappear.
● Entereachvalueandtap[Timeadjust]tochange
theclock.
Resetsthetimeif
pressed.