22
<
Before Use
>
Battery exchange
Battery
Batteryremovalclip
Batteryconnector
Note:
Detaching the battery while the power is
on can cause data you have recently edited to be
lost.
1. Open the battery cover by sliding as shown in the
ÀJXUH
2. Pull out the Battery removal clip and slide out the
battery.
3. Remove the battery from the battery holder.
The battery holder can not be
removed from the transmitter.
Slide it to the position where the battery can
be held by the internal battery holder.
Batteryholder
Battery
Batteryremovalclip