FUTABA T8FG User Manual

T8FG-2.4G
T8FG
Radio Control
Instruction Manual
INTRODUCTION
Thank you for purchasing a Futaba digital proportional R/C system. In order for you to make the
best use of your system and to use it safely, please read this manual carefully. If you have any
difficulties while using your system, please consult the manual, our online Frequently Asked
Questions (on the web pages referenced below), your hobby dealer, or the Futaba Service
Center.
Owner’s Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible.
There are many pages of setup procedures and examples. However, it need not be your sole
resource of setup guidelines. For example, the back cover includes a quick-start set of
instructions and the Frequently Asked Questions web page referenced below includes this type
of step-by-step setup instructions for a variety of other model types.
Due to potential unforeseen changes in production procedures, the information contained in this
manual is subject to change without notice. No part of this manual may be reproduced in any
form, at any time, without prior permission.
Support and Service: It is recommended to have your Futaba equipment serviced annually
during your hobby’s “off season” to ensure safe operation.
Futaba Corporation
1

FUTABA T8FG Specifications

General

Display	128x64 dot LCD
Telemetry	No
Trainer Port	Yes
Type	Computer
Model Memory	20 models
Modulation	FASST
Battery	NiMH

Summary

Introduction to the Futaba T8FG Manual

Manual Guidance and Technical Support

Highlights the manual's helpfulness and points to other resources for assistance and setup.

Instruction of the T8FG Transmitter

Location of Controls

Identifies the physical layout and components of the T8FG transmitter, including sticks and buttons.

Charging the Battery

Details the process of charging the transmitter's Ni-MH battery, including time and precautions.

Operation of the Touch Sensor

Explains how to use the touch sensor for navigation and selection in various modes.

Turning On the Transmitter

Describes the procedure and initial display upon powering on the T8FG transmitter.

Basic Editing Operations

Outlines the fundamental methods for editing settings and navigating the menu using the touch sensor.

Home Screen Overview

Details the main screen displayed after powering on, serving as the base for edits and information.

Linkage Menu Usage

Explains how to access and use the linkage menu for setting primary model data.

Model Menu Functions

Describes the model menu for setting mixer data specific to each flight condition.

System Menu Configuration

Covers the system menu for configuring transmitter settings like display contrast and stick mode.

Federal Communications Commission Interference Statement

FCC Compliance and Safety Precautions

Warns about modifications, states FCC Part 15 compliance conditions, and RF exposure requirements.