Need help?Do you have a question about the Futura EG2 and is the answer not in the manual?
General| Brand | Futura |
|---|---|
| Model | EG2 |
| Category | Control Systems |
| Language | English |
Details main control system components: control box, slope sensor, receiver.
Provides a detailed breakdown of each control and display element on the EG Series control box.
Explains using offset knobs to adjust the on-grade position for each receiver.
Explains switching between automatic and manual control modes using buttons and indicators.
Describes LED displays indicating above, below, or on-grade status with directional feedback.
Defines laser receiver deadband tolerance and settings for the internal beeper (horn).
Lists supported valve types: proportional time, Danfoss, SCV, and proportional current.
Details setting the minimum signal for slow cylinder movement and blade adjustment.
Explains enabling tilt sensing and the step-by-step procedure for calibrating the sensor.
Details wiring assignments for the EG-2 Control Box, including valve, power, and remote cables.
Shows how system components like sensors and receivers connect via cables.
To Next Page
