Need help?Do you have a question about the Future light Scan SC-740 and is the answer not in the manual?
General| Brand | Future light |
|---|---|
| Model | Scan SC-740 |
| Category | Flood Light |
| Language | English |
Follow safety instructions and warnings for safe operation and device condition. Manufacturer not liable for damages from non-observance.
Instructions for unpacking the FUTURELIGHT SC-740 and checking for transportation damages.
Connect the projector to the mains using the enclosed power-plug.
Connect using stereo shielded cable and 3-pin XLR-plugs. Terminate the last scanner with a 120W resistor.
Details DMX channels 1-4 for Pan, Tilt, and their fine adjustments in 16-bit resolution.
Details on switching the HMI 575 lamp On/Off via the control board or external controller.
Step-by-step guide to controlling the lamp's power status using the fixture's onboard control panel.
Access main menu for setting address, lamp hours, lamp control, test, reset, and special functions.
Adjust movement resolution between 8-bit (10 channels) or 16-bit (13 channels).
Procedure to select and confirm the DMX address (001-496) for fixture control.
Select 'On' to switch the lamp on or 'Off' to switch the lamp off.
Resets the fixture to index all effects and return to their standard positions.
Indicates the lamp is too hot to restart; waits 5 minutes before automatic re-ignition.
Lamp ignition failure after multiple attempts; check lamp, ignitor, ballast, or ambient temperature.
Main PCB does not communicate correctly with the control board.
Magnetic-indexing circuit or stepper motor malfunction for the color wheel.
Magnetic-indexing circuit or stepper motor malfunction for the static gobo wheel.
Magnetic-indexing circuit or stepper motor malfunction for the rotating gobo indexing.
Magnetic-indexing circuit or stepper motor malfunction for the effect wheel.
Fixture was overheating; lamp switched off. Message displays until temperature is suitable.
Indicates failure of the lamp lighting sensor. Contact dealer.
Use soft lint-free cloth with glass cleaner; avoid alcohol/solvents. Clean lenses weekly, fan monthly.
To Next Page
