8M093X01 R1.0 22
The back of the DVR-LX includes connections for:
• RX and TX- stacked configuration ships with cables connected to the RX and TX
ports on the back of the duplexer.
NOTE: RX/TX cables shipped separately for flat mount configuration and must
be connected as part of the installation.
The back of the duplexer provides the Antenna port for the DVR-LX antenna.
In-Band Notch Filter Connectors
For In-Band DVR-LX configurations, one or two notch filters are also required. Typically,
the DVR-LX notch filter sits on top of the MSU notch filter, as shown in Figure 15 and
each filter is connected between the DVR-LX/MSU and its antenna.
Figure 14: In-Band Notch Filters for UHF and VHF
Figure 15: Notch Filter Connectors for UHF and VHF – Front and Back View
To Next Page
Loading...