Futurecom DVR-LX - Standard Installation Cables

8M093X01 R1.0 27
Standard Installation Cables
The following table outlines all of the cables that are needed for installation. It identifies
the cable part number, length, connector types, and a description of what the cable
connects together. All cables are provided at time of order except the auxiliary cable
with cross-band configurations. The ordering code is provided for this optional cable, if
needed. There is also a reference number for each cable that is used throughout the
configuration drawings.
Ref
#
PN
Length
Connectors
Description
1
7W083X05-01
3ft
20-Pin to DB25 Male
DVR-LX to MSU Control Cable
NOTE: Custom lengths available – up to
25ft.
2
7W083X06-01
2.5ft
9-Pin to DB15 Female
DVR-LX Auxiliary Cable
NOTE: Optional for Cross-Band, Ordering
Code DDN9031
3
1W083A01-01
18ft
DVR-LX Power Cable
4a
7W083X17-01
3ft
RA Mini UHF Male to
RA Mini UHF Male
MSU to In-Band Filtering RF Cable
NOTE: For In-Band with non APX8500
4b
7W900X94-02
3ft
RA QMA to RA Mini
UHF
MSU to In-Band Filtering RF Cable
NOTE: For In-Band with APX8500
5
7W900X04-02
2.5ft
RA TNC Male to RA
TNC Male
DVR-LX to Duplexer RX/TX Cables
NOTE: For Flat Mount Duplex, 2 cables
provided
6
7W083X16-01
3ft
RA Mini UHF Male to
RA Mini UHF Male
DVR-LX Ant to In-Band Filtering RF
Cable
NOTE: For VHF/UHF In-Band
7
7W083X09-01
1ft
15-Pin Male to 9-Pin
Female
RF Switch Cable
NOTE: For In-Band
8
Control Head cable provided by Motorola