Saw chain
To ensure safe and proper operation, the saw
teeth must always be sharp.
The saw teeth must be filed down when:
- the sawdust assumes a powdery state;
- additional force is required for the incision;
- a straight incision is no longer possible;
- the vibrations become stronger;
- the fuel consumption increases.
Instructions for filing the saw teeth:
Always wear safety gloves.
Warning! Setback can result from not
following the instructions.
Before filing:
- Make sure that the saw-chain is firmly
clamped.
- Make sure that the motor is switched off.
- Use a round file with the appropriate size for
the chain:
Model FX-KS146: 0.325 / 058 - 64
Model FX-KS142: 0.325 / 058 - 64
Place the file on the saw tooth and turn it into
Push straight alignment forward. Keep the
position of the file as shown in the illustration.
To Next Page
Loading...
Need help?
General
