Original User Manual FUXTEC FX-PS152 / FX-PS162
11
blocked or jams. This is more likely in areas where it is difficult to see the material
being cut. For easy and safe cutting, approach the weeds to be cut from your right
to your left side. If an object or stick of wood is hit unexpectedly, this can reduce a
cutter blade kick-back.
5. Notes on working with the metal blade
A metal blade with 3 teeth is delivered with the device. It is used for cutting bushes and
weeds. The use of the saw blade with this device is prohibited.
WARNING DANGER
Also, wear head, eye, face and hearing protection, and safety shoes. Do not wear rings
and jewelry or
loose, dangling clothes that could get caught in the device.
Do not wear footwear with unprotected toes and do not work
barefoot or without leg protection. In certain situations,
you must wear head protection.
6. Putting on the shoulder harness
WARNING DANGER
Do not cut with blunt, cracked or damaged metal sheets.
Before working, check the surface for obstacles such as stones, metal bars or other
objects. If they cannot be removed,
mark this position to avoid collision with
the blade. Lines can become entangled on the blade head and flap or be swirled in
the air.
WARNING DANGER
Do not use the motor scythe for cutting out trees.
WARNING DANGER
Always use the shoulder strap. Adjust and fix the belt and
Clamp the belt on the device so that the device hangs a few cm above
the ground. The cut-out head and the protective shield should be aligned
horizontally in all directions. Pre-tension the machines on the right side of your body.
To Next Page
Loading...
Need help?
General
