Original User Manual FUXTEC FX-PS152 / FX-PS162
26
2. Difficulties during operation
Situation Cause Solution
The engine does
not reach the
speed
Choke is in "COLD START" position, an
exhaust system is blocked no air supply,
moving elements worn, ignition spark weak
too large valve clearance, cylinder head
sooty
Open choke, replace exhaust system
Check or replace ignition coil, adjust
flywheel, spark plug
Operating
materials are
leaking
Lines to carburetor blocked Spark plug
spacing incorrect
Replace lines and carburetor Adjust
gap dimension
Motor-
Noises
Wrong choke position,
Camshaft damaged
Check/replace camshaft
Carburetor
leaking
Failure of the check valve on the tank cap
Replace the fuel filler cap
Carburetor gasket is worn out Replace carburetor or gasket
If no troubleshooting solves the problem, contact your dealer or the
manufacturer directly. Only use original parts approved by the
manufacturer. Otherwise, there is a risk of danger.
17. Customer Service
Have your purchased device repaired only by qualified personnel and only with original spare
parts. This will ensure that the safety of the device is maintained.
Please contact the manufacturer FUXTEC GmbH directly at any time regarding
maintenance work and procurement of spare parts at www.fuxtec.de
18. Warranty
The warranty period is 24 months from the date of purchase. Please keep your proof of purchase
in a safe place. Excluded from the warranty are wearing parts and damage caused by improper
use, use of force, technical modifications, use of incorrect accessories or non-original spare parts,
and repair attempts by non-qualified personnel. Warranty repairs may only be carried out by
authorized specialist dealers.
To Next Page
Loading...
Need help?
General
