Original User Manual FUXTEC FX-RM Series_rev15
22
Stop
Release the brake lever to stop the motor.
WARNING: The blade will continue to rotate for a few seconds after the engine is turned off. Unplug the spark plug
connector when leaving the mower unattended.
MOWING INSTRUCTIONS
- In certain circumstances, such as high grass, it may be necessary to raise the cutting height to reduce the thrust and engine
load, which can also lead to grass residue. It may also be required to reduce the basic speed and push the mower twice over
this area
- Reduce the cutting width by covering the previous cut again to perform heavy cutting work
- The pores in the grass catcher bag can become clogged with dirt and dust, which means that the catcher can pick up fewer
cuttings. To avoid this, you should regularly wash the catcher with a water hose and let it dry completely before reusing it.
- Keep the upper part of the engine around the starter free of grass and chopped grass clippings. This will improve engine
airflow and prolong engine life.
Starting the FX-RM5196eS models
1. Tighten the brake lever (1) to the handle
2. Then start the engine with the start button (2)
3. As soon as you release the brake lever, the engine stops immediately. To empty the grass catcher box, always
remove the brake lever and stop the engine. Otherwise, there is an acute risk of injury from rotating blades.
1
2
To Next Page
Loading...
Need help?
General
