Original User Manual FUXTEC FX-RM Series_rev15
27
You can use the EASY CLEAN connection to clean the inner housing (cutting unit). Simply
connect a water hose to the connection on the top of the housing and slowly turn on the
water while the cutting mechanism is running. The rotation of the cutting mechanism
distributes the water evenly in the inner housing and can thus flush away dirt residues.
The paint on the inner side of the undercarriage may flake off over time due to
aggressive operations. In this case, you should paint over the paint with rust-resistant
paint to protect the undercarriage from the corrosion of the metal.
Check the V-belt 1-2 times a year and remove any cuttings from it.
Once a year, the drive wheels should be cleaned inside.
Remove both wheels. Use a brush or compressed air to remove grass and dirt from the gear wheel and gear rim.
11. Mow and Stow Function (FX-RM46BS475IS only)
With the Mow and Stow function, you can store your mower in a space-saving way after work is done. For this stowing, please
proceed as follows:
To Next Page
Loading...
Need help?
General
