FUXTEC FX-RT226 User Manual

Original Bedienungsanleitung FUXTEC FX-RT226_rev02
49
Maintenance spark plug
In order to ensure the normal operation of the engine, the ignition distance of 0.6-0.7mm
must be maintained and free of carbon deposits. Always carry out the following steps with the
engine switched off:
1. Carefully pull out the spark plug connector. Do not pull on the cable but directly on the plug
2. Use the included spark plug wrench to unscrew the spark plug
3. Visually inspect the spark plug for damage and electrode burn-
Remove the carbon deposits
4. Check the gap with a feeler gauge and bend the electrode to the correct distance from 0.6
to 0.7mm
5. Check the spark plug washer and turn the spark plug to a torque of 12-15 Nm
6. Replace the ignition cap on the spark plug
WARNING
The spark plug must be screwed tightly otherwise the engine will be hot and will be damaged.

FUXTEC FX-RT226 Specifications

General

Brand	FUXTEC
Model	FX-RT226
Category	Brush Cutter
Language	English